ContentHub
WINSTA_Podcast_1920x1080px_en-EN_CC.mp4
14 views
View transcript
Hi, I'm Clive Humphrey, product manager at WAGO UK and Ireland. Today I'm joined by Frans Mosterman from WAGO HQ. In this episode we're going to talk about the WAGO modular wiring system that we call WINSTA®. Hello and welcome, Franz. Yeah. Hi. Yeah. Yeah. Frans Mosterman I'm working for, WAGO in Germany, and, Yeah, at this moment now, my role is as a business development manager. I want to. I to move. WINSTA® in the good direction into European and global market. Yeah. So a modular wiring system that can be used in buildings. Tell us what that actually means. Yeah. When you look about installation, what normally I always did from traditional in the past is that you use cable, cable boxes and terminal blocks to make a connection. And, we have another possibility to make it completely pluggable. So that means we have connectors or what you can put on the cable as a starting point. And then with a distributors, and pre-assembled cables, you can build up a complete pluggable insulation, that's more easy and, to, to work with. Yeah. Oh, if it's, if it's easier to work with, does that mean it's faster to use? Yeah, absolutely. Yeah. So when we look into the market and the figures and the experience from installers, it's, it's speeding up that you have a time saving, to 70%. So and that's a lot. Yeah. Gosh. That is that's a big time saving. But if it's saving time, does that mean it's a more expensive solution? When you look through the materials, it could be or probably will be that the materials are a little bit more expensive. But, when you see, look at the time saving and the, money, what you save, then, it can save up to 30%. So that's also a lot. Wow. That is a big saving. Yeah. Right. So are there any other savings involved in the in the modular wiring system? when you look into the environment about construction and what's happening outside, there are lots of things that, have, make pressure on traditional insulation. So, when you look to the construction. The way of construction change. So, when you have an end customer. What? Who wants a rational residential house or, an office building? Time to build. That's very, very important. So, what we see on the construction side that they change, the way of construct. So it is going to more prefab. Instead of using these raw materials. So, when you look to in the, in the last ten years. Yeah, I think it's about, that, 50% of the time that they build now, to ten years ago. So they speeding up construction site enormously. Gosh. And so it's clear then that the WAGO WINSTA® system can help in that situation. So what are the particular features and benefits of the WAGO WINSTA® system? when you have a installation. And it saves, time. Then, it is also about, the quality. That that you then can improve. So, when you have a plugin installation. It's click and go. So that means when you made the connection, you have a good it's it's without any failure. So also in this relationship. When you talk about failure cost and there's lots of research in the market and people are talking about. Yeah. What about failure cost? It's estimated that about 10 to 50% of, of the total cost is failure cost. In, in in construction. Yeah. So, there's also a big benefit that you do your installation once and that you have the quality then guaranteed by the product and the system. So the product guarantees quality, right? The system guarantees speed. Yeah. Simplicity. Right. So there seems that there's lots of benefits of using this sort of modular wiring system in a building. Are there any restrictions as to what sort of building it can be used in, or could it be used in many different types? Yeah, you can use it a lot, but you have to look into the construction. Yeah. So you need the space. In a wall or above the hanging ceiling to, to put your cabling system in. So you have to look into the construction. Is it possible to, to use it. Or it could be also possible that when you have a wall from concrete or stone with a pipe in that you use an open end that's not so effective. So because then you still have to mount something on the wires, but you have to look in into the construction where you are able to put the cabling in. Another thing is to consider is about the standards that when you say, okay, does the standards allow that, you have a probable installation. So when we look at the European level, there's no problem because we looked at it into and also from the product standard. It's no problem to, to use that. But for every country we have to look into the national standards. Yeah. So it sounds as though the sooner the modular wiring aspect can be incorporated into the design, the better. So the building designers need to understand the advantages that a modular wiring system can offer in the building that they're looking to design. Yeah. Yeah. And that's the moment that you have to look at it on the design phase. That also means that, okay, when they start the project and when it's considered as traditional, also, then you have the possibility to make a pluggable installation. But, at the beginning, you, need to choose. The components, the cabling as well. And that's a big difference. To, traditional. when you look to a traditional installation, mostly they, they make and design where the lightings are, where the switches are or, and the outlets are. And then mostly when they're coming to us to, to establish this insulation, they, buy the cable, they buy the cable boxes, whatever. And on site they decide how to to make the installation. When it's a plug installation, you have to make your design or engineer. Which cables do you need, which type of modules or distribution you need. So you need to prepare. In front. So, for the work preparation or the engineer. It's more work. I, I have to be honest about that. But that also gives then, the quality because you really thinking about. Okay. How can I make something? What will work? At the end. Yeah. But as you said already, it's the installation time. That is the costly part. Yeah. So if the installation time can be reduced because the engineers have planned ahead, then that's going to make the whole project less costly. Absolutely. Yeah, absolutely. Because what we see is that at the end, it comes to a cost saving when from my experience, and now I'm working for about five years for WAGO headquarters. But at the time before I was working as a project manager in the Netherlands and did mostly for the National. A little bit bigger installers. And when this building crisis came around 2009, I expected that the installers were already did. Pluggable installation that they would go for the more traditional because the people were available, not the project. So in that time people were available and, they're kind of waiting somehow also for the projects. But in this time we saw that and I didn't expect it to be, honestly. But in that time we saw that, the WINSTA® or pluggable installation in general came up more popular. Yeah. Yeah. And that was that was something that I did not expect it. Oh. And the reasons of the, of that are 2 or 1 is that the construction companies. They are the only way to get an order is to build quicker and cheaper. And for the installer means that it means also that he had to be quicker and, and cheaper. So, in this crisis time. The volume or have from, from probable installation to, to traditional installation increased enormously. even in the difficult times, installers and building designers could understand the advantages and how that was going to help. Yeah. Wow. There seems to be so many advantages here. So if somebody wants to find out more information from WAGO, what should they do? You, of course, can look on the internet or on our website. There you can find the information, but. Okay. It could also be or better to contact our offices in the different countries. Okay. Excellent. Thank you, Frans. It's been really interesting to talk about WAGO modular wiring system and modular wiring in general. Thank you. Okay. Thank you. Bye.